Unattended Setup
On this page
This manual describes how to use the unattended setup of the IACBOX which allows you to install the system with pre-defined settings.
Preparation
There are 4 pre-defined profiles for the unattended installation included on the installation image.
01_uas2nic_en.uas
Installation with 2 network cards, english language02_uas2nic_de.uas
Installation with 2 network cards, german language03_uas3nic_en.uas
Installation with 3 network cards, english language04_uas4nic_de.uas
Installation with 3 network cards, german language
If you are installing multiple systems with the same basic settings,
then you can create your own unattended setup file. In order to get
started simply copy one of the files (.uas) from above and perform the
according changes with an advanced text editor. Please note that text
editors like Windows NotePad can potentially break the line breaks. Use an editor that uses unix style line breaks \n
such as Notepad++.
After opening the file with an according text editor you can directly edit all basic settings for this profile. Please note that the profile shown in the FT-Setup will be named after the file name, so it is suggested to use an easy to memorize filename. Also the file extension must be .uas in order for this profile to be recognized. After this is done the file can be copied directly on the USB stick.
Installation
By starting the installation from an USB stick you will find your new UAS profile in the Unattended Setup selection screen.
Here you can select one of the UAS profiles with the SPACE BAR and get started by selecting Start Express Setup with TAB.